Stop roof leakage, seepage and dampness for good. Wellcool provides professional roof waterproofing in Pakistan for houses, plazas, factories and commercial buildings — using tested membranes, coatings and trained teams that protect your roof through the hottest summers and the heaviest monsoon rains.
★★★★★ Trusted by homeowners & businesses across Pakistan
Durable systems that protect your roof season after season.
Engineered for Pakistan's heavy rain, heat and humidity.
Free site inspection and a clear written quotation.
Your roof is the single most important protective layer of your building. It takes the full force of the summer sun, the pounding of monsoon rain, dust storms, winter fog and the daily cycle of heating and cooling. When the roof fails, the damage rarely stays on the roof. Water finds its way into ceilings, walls, electrical wiring, cupboards and even the steel reinforcement inside the concrete slab. What begins as a small damp patch can turn into peeling paint, fallen plaster, fungus, a short circuit, or a weakened structure that costs many times more to repair than it would have cost to protect.
At Wellcool, we specialise in professional roof waterproofing services in Pakistan. Our teams waterproof flat RCC roofs, sloped roofs, terraces, mumty roofs, plaza tops, factory sheds and commercial buildings. We do not believe in one product for every roof. Instead, we inspect your roof, find the real cause of the leakage, and recommend the waterproofing system that suits your building, your budget and the climate of your city — whether you live in the scorching plains of Punjab, the humid coastal belt, or the rainy northern areas.
Whether you are building a new house and want to protect it from day one, or you are tired of buckets under your ceiling every monsoon, our roof waterproofing service gives you a dry, sealed and long-lasting roof.
Pakistan’s weather is one of the toughest tests any roof can face. In many cities, roof surface temperatures climb above 60°C during May and June, while night temperatures drop sharply. This constant expansion and contraction creates hairline cracks in concrete, plaster and old mud-and-brick tiling (tarza or kacha layers). A few weeks later, the monsoon arrives with intense, concentrated rainfall. Water sits on flat roofs, enters those micro-cracks and slowly travels through the slab.
Most homes in Pakistan are built with flat reinforced concrete roofs. Flat roofs are practical, but they are also prone to ponding water when the slope towards the drain pipes is poor or the outlets are blocked with dust and leaves. Standing water is the biggest enemy of a roof: even a good-quality slab will eventually allow moisture through if water sits on it for days.
Moisture inside the slab also attacks the steel bars. When steel rusts, it expands and pushes the concrete cover off from inside — a problem known as spalling. You see it as cracked ceilings with brown rust marks and exposed bars. Proper roof waterproofing stops this cycle before it starts, protecting not just your paint and plaster but the structural life of your entire building.
Many property owners only call for help after water starts dripping. In reality, a roof shows warning signs much earlier. Watch out for the following:
If you notice even one of these signs, it is time for a professional inspection. The earlier the roof is treated, the simpler and more affordable the solution.
There are many waterproofing contractors in Pakistan, but quality varies widely. Some simply pour a layer of chemical on a dusty roof and leave — and the leakage returns after one season. Wellcool focuses on doing the job properly, from surface preparation to final testing.
We trace exactly where water enters — cracks, joints, drains, parapets or tank bases — before recommending any treatment.
Our applicators follow manufacturer specifications for surface prep, primer, coverage rates and curing time.
We use branded cementitious, polyurethane, acrylic and bituminous systems suited to each roof type.
You receive a detailed quote with area, system, layers and timeline — no hidden charges later.
Every roof is different. A new concrete slab, a 20-year-old roof with brick tiling, and a metal factory shed each need a different approach. Below are the main roof waterproofing systems we apply across Pakistan.
Polyurethane waterproofing is a liquid-applied membrane that cures into a seamless, rubber-like layer. Because it has no joints, water has no gap to enter. PU membranes are highly elastic, which means they stretch and recover as the roof expands in summer heat and contracts at night, without cracking. This makes them one of the best long-term solutions for flat RCC roofs and terraces in Pakistan. A UV-resistant top coat can be added to protect the membrane from direct sunlight.
Cementitious systems are polymer-modified cement coatings applied in two or more layers. They bond extremely well with concrete and plaster and are easy to apply around corners, drains and parapet joints. Cementitious waterproofing is an economical choice for new construction, under-tile protection and areas that will later be covered with screed or tiles. It is also widely used inside water tanks and wet areas.
Modified bitumen membranes (APP or SBS sheets) are heat-welded onto the roof using a torch. The overlapping joints are fused together to create a continuous waterproof sheet. Bituminous membranes are thick and tough, and are commonly used on large flat roofs, plazas, basements and commercial buildings. Because bitumen absorbs heat, we recommend combining it with a reflective coating or tile finish to keep the building cool.
Acrylic elastomeric coatings are water-based, flexible coatings applied with a roller or spray. They seal hairline cracks and create a white or light-coloured reflective surface. Their biggest advantage in Pakistan is that they combine waterproofing with heat reduction — reflecting sunlight and lowering the temperature of the top floor. They are ideal for houses where both leakage and heat are a problem.
Before any membrane is applied, structural and surface cracks must be treated. We open up cracks, clean them and fill them with polymer mortars or flexible sealants. Expansion joints, pipe penetrations and parapet junctions are sealed with PU sealants and reinforcement fabric. For leakage coming through the slab itself, we can use injection grouting to fill voids from inside the concrete.
Our teams have the equipment and experience to handle residential, commercial and industrial roofs of every size:
Good waterproofing is 70% preparation and 30% application. This is the process our team follows on every roof:
We visit your property, check the roof, ceilings and walls, measure the area and identify every leakage point and weak spot.
We explain the best system for your roof — with options — and share a written quotation with scope and timeline.
Loose plaster, old coatings, dust and fungus are removed. Cracks are opened, cleaned and repaired so the new system bonds properly.
Drains are cleared, low spots corrected, and corners, joints and pipe penetrations reinforced with fillets and fabric.
Primer is applied followed by the waterproofing membrane in the specified number of coats and thickness.
After curing, we carry out a water ponding test where suitable, clean the site and hand over your sealed, dry roof.
The life of a waterproofing system depends heavily on the material and the thickness applied. We work with branded, well-tested chemical systems available in the Pakistani market and follow the coverage rates recommended by the manufacturer. We never thin down products to save cost, and we never skip the primer coat. Where a roof receives heavy foot traffic — for example, roofs used for drying clothes or as a family terrace — we recommend a protective top layer such as tiles or a traffic-grade coating, so the membrane underneath stays intact for years.
For roofs that also suffer from extreme heat, we can combine waterproofing with our roof heatproofing and reflective roof coating services. This dual treatment keeps the roof dry and can noticeably reduce top-floor temperatures in summer.
The cost of roof waterproofing in Pakistan is usually calculated per square foot, and it depends on several factors. Because no two roofs are the same, we always prefer to inspect first and then give you an exact figure rather than a guess. The main factors that affect the price are:
A cheap job that fails in one season is the most expensive option in the long run. We help you choose a system that gives the best value over its lifetime — and we explain the difference clearly so you can decide with confidence. Request a free survey for a site visit and an accurate quote.
The ideal time for roof waterproofing in Pakistan is the dry season — generally from October to May in most cities — when the slab is fully dry and the weather allows proper curing. Waterproofing a roof two to three months before the monsoon gives you peace of mind when the rains arrive. That said, leakage problems cannot always wait. If your roof is leaking during the rainy season, our team can carry out emergency leak sealing on the problem areas and plan the full waterproofing for the next dry spell.
A professionally waterproofed roof needs very little care, but a few simple habits will extend its life considerably:
Wellcool provides roof waterproofing services in major cities and towns across Punjab, Khyber Pakhtunkhwa and the Islamabad Capital Territory. Our teams regularly work in Lahore, Islamabad, Rawalpindi, Faisalabad, Multan, Gujranwala, Sialkot, Peshawar, Abbottabad, Bahawalpur, Sargodha and many more. Each city has its own weather pattern — from the extreme heat of Multan and Bahawalpur to the heavy rainfall of Sialkot, Murree and Abbottabad — and we adapt our waterproofing systems to suit local conditions.
Roof leakage is often linked to other moisture problems in the building. Wellcool also offers bathroom & washroom waterproofing, basement waterproofing, water tank waterproofing, wall & ceiling waterproofing, leakage & seepage treatment and crack filling & repair. One inspection can identify all the sources of dampness in your home, so you can solve them together.
Every Wellcool customer receives the same complete service — from the first inspection to the final water test. No shortcuts, no half-finished work.
A detailed inspection of the roof, ceilings and walls to locate every source of leakage.
Removal of loose plaster and old coatings, plus crack filling and joint sealing.
Clearing of outlets and correction of low spots that cause ponding water.
Primer and membrane applied in the correct number of coats and thickness.
Ponding or spray testing after curing to confirm the roof is sealed.
Guidance on maintenance and quick response if you ever need us again.
Your building is our priority. From the first phone call to the final water test, our team treats your roof as if it were our own. We arrive on time, protect your property while we work, and leave the site clean.
We follow one simple rule: prepare properly, apply correctly, test thoroughly. That is how a roof stays dry for years — not just until the next rain.
Punjab, KPK & Islamabad
Site survey & quote
Tested chemical systems
Clear timelines
The life of roof waterproofing depends on the system, the thickness applied and how the roof is used. A properly applied cementitious coating typically lasts several years, while good-quality polyurethane and bituminous membranes can last considerably longer when protected from foot traffic and maintained. During inspection, we explain the expected life of each option for your roof.
A standard house roof of 1,000 to 2,500 square feet usually takes two to five working days, including surface preparation, crack repair, application of coats and curing time. Larger commercial and industrial roofs are scheduled in phases. We share a clear timeline with your quotation.
In many cases, yes. If the existing tiles or screed are firmly bonded and the slope is acceptable, we can clean, repair and apply a suitable membrane on top. If the old layers are hollow, broken or holding water underneath, removal is the better long-term solution. We decide this only after inspecting your roof.
The roof must be dry for most waterproofing systems to bond properly, so the dry season is ideal. During the monsoon, we can carry out emergency leak sealing on the problem areas and schedule complete waterproofing when the weather is dry.
Standard waterproofing mainly stops water. If you also want to reduce heat, we recommend a reflective or heatproofing top coat over the waterproofing layer. This combination keeps the roof dry and helps lower top-floor temperatures in summer.
No. All work is done on the roof, so you can live normally in your home. We only ask that the roof is kept clear of people and pets while coats are curing.
Wellcool serves cities across Punjab, Khyber Pakhtunkhwa and Islamabad — including Lahore, Islamabad, Rawalpindi, Faisalabad, Multan, Peshawar and many smaller towns. Request a free survey to confirm availability in your area.
Simply request a free survey with your city and approximate roof size. Photos of the roof and the leaking ceiling help us understand the problem. We then arrange a site inspection and share a detailed written quotation.
Complete moisture protection for every part of your building — from the roof down to the basement.
Stop seepage from floors, showers and pipes into walls and lower floors.
Protect basements from groundwater, dampness and wall seepage.
Seal open terraces and balconies against rain and standing water.
Leak-proof, hygienic lining for overhead and RCC water tanks.
Durable pool lining that stops water loss and structural damage.
Prevent leakage out and contamination into underground tanks.
Treat damp walls, peeling paint and leaking ceilings at the source.
Locate and permanently fix leakage and seepage problems.
Tell us your city and roof size, send a few photos on WhatsApp, and our team will arrange a site visit. No obligation, no hidden cost — just a clear plan to make your roof leak-free.
We are here to make your building dry, cool and protected. Call or message us for a free estimate.